| Video
System: PAL fully compatible with Australian TV System.
Image Device:
795 (H) x 596 (V)
473 820 Pixel 752 (H) x 582 (V) effective
⅓"
SONY
ICX639BKA
Super
HAD II CCD. *CCD=CCD image sensor "Super
HAD CCD Ⅱ" is a trademark of Sony Corporation. The "Super HAD
CCD Ⅱ" is a version of Sony's high performance CCD HAD
(Hole-Accumulation Diode) sensor with realized sensitivity (typical)
of 1000mV or more per 1µm2 (Color: F5.6/ BW: F8
in 1 s accumulation equivalent.)
click on images to enlarge
Lens: Board Type 3.6
mm Focal Length, accessory Lenses:
2.1, 2.9, 5.7, 8, 12, 16, 25 & 50 mm
(BL)
types on this
page, additional information
here. Lens Cover must be removed to change Lens, removing
Lens Cover Voids Warranty.
Lens Cover cannot be fitted with 2.1, 25 & 50 mm lenses.
Consider
Bullet-C21hrW if you wish to fit
1.78 FishEye, 2.1, 2.9,
3.6, 5.7 or 8 mm Lenses.
Scanning System: 2 : 1 Interlace
PAL 50 Hz vertical, 15 625 Hz horizontal.
Synchronisation: Internal.
Video Output: 1.14 V p-p Composite
Video 75 ohms, suit Australian TV, VCR, AV & Video inputs, BNC
socket, ~ 1000 mm cable.
Horizontal Pixels: 720 + Better
than Super-VHS near DVD resolution, this value is provided for
comparative purposes only.
Sensitivity: ~ 0.3 lux (Colour) ~
0.1 lux (Monochrome), an image is discernable when subject is
illuminated by Full overhead Moon, this information provided
for comparative purposes only.
Day/Night: Automatic, colour sub-carrier
switches-off at low illumination levels to eliminate colour noise &
improve image.
Automatic Electronic Shutter
(AES): 1/50 to 1/120 000 second, 20 milliseconds to 8.33
microseconds, additional information
here.
Automatic White Balance: On.
Automatic Gain Control: On.
Signal to Noise ratio: 50 + dB,
measured with AGC Off.
Power Requirements: 12 Volts DC
Regulated, ~ 65 milliamps, 2.1 x 5.5 mm DC socket ~ 1000 mm cable.
Dimensions: ~ 21.5 mm Diameter, ~
80.5 mm Long (includes ~ 5 mm protrusion with ¼"
UNC thread for Mounting Bracket), ~ 65 grams (includes Cable &
Connectors).
 |
